Sabbatini Equipos Hidráulicos has a complete range of magneto-mechanical filters for the most diverse applications.
The most complete line in this type of filters is available at Sabbatini Equipos Hidráulicos, starting with the largest flows of 250 liters through 150 liters, 120 liters to reach the smaller flows such as 64 and 32 liters. We always emphasize the importance of the care of hydraulic equipment through the purity of hydraulic oil. Between 70 and 90% of the most common equipment failures occur due to contamination, in the same way a better performance and greater durability will be guaranteed according to the purity of the oil we use. Currently, there are a good amount of conventional and advanced products on the market that use magnets in various configurations and geometries such as those provided by Sabbatini Equipos Hidráulicos.
The tribologists and oil analysts also know that in some machines the particles suspended in the oil can be 90% ferromagnetic particles (steel or iron).
Generally, one or both of the lubricated sliding or rolling surfaces have iron or steel metallurgy.
This includes friction surfaces such as gears, bearings, pistons, cylinders, etc.
- Our Magneto-Mechanical Filters use high power ceramic magnets (4000 G – the magnetic field unit of the Cegecimal System of Units being gauss). Compare this level of magnetic force with the strength of the magnet on the door of a refrigerator between 60 and 80 gauss.
- The higher the flux density, the greater the magnetic gradient potential and the magnetic force acting on the nearby iron and steel particles.
On the other hand it has an additional filtrate with a double mesh of stainless steel.
- Because of its double magnetic-mechanical effect, it not only removes all “antimagnetic” and organic impurities, but also “antifriction” metal residues, production residues and oil aging products.
- This also reduces the wear that is verified during the exercise as a result of the removal of these impurities that cause premature aging of the oil.
